How is 33 tooth emulsion pump?

With the gradual improvement of people's living standards, the use of many household items has become more and more convenient, including the application of 33 teeth emulsion pump. 33 tooth emulsion pump, also known as press emulsion pump, is a kind of use of the principle of atmospheric pressure balance, by pressing the bottle of emulsion pop out, but also the outside atmosphere into the bottle of tools. Next let's talk about 33 teeth emulsion pump is what?

1.33 Dental emulsion pump can be divided into plunger type and spiral type. Functions can be divided into spray, foundation cream, emulsion pump, aerosol valve, vacuum bottle.

2.33 The size of the dental emulsion pump is determined by the caliber of the bottle. Spray size 12.5mm-24mm, water yield 0.1ml/-0.2ml/ time. Generally used for packaging perfume, gel water and other products. The length of a nozzle of the same caliber can be determined by the height of the bottle.

3.33 The specification of the pump head of the dental emulsion pump ranges from 16ml to 38ml, and the water yield is 0.28ml/-3.1ml/ time. Commonly used in face cream and dish soap.

4. Special dispensers such as foam pump heads and hand push nozzles. Emulsion pump head is a non - inflated hand pump head. It does not need to be inflated to produce foam, only light pressure to produce a quantitative amount of high-quality foam. It is usually equipped with a special bottle. Hand push nozzles are commonly used in products such as detergent.

5. The composition of distributor is more complex, generally including: dust cover, chuck, chuck rod, gasket, piston, spring, valve, bottle cap, pump body, straw and valve ball (steel ball and glass ball). Bottle caps and dust caps can be colored, plated, and coated with anodized rings. Because a set of emulsion pump head involves many molds, the order quantity is large, and the smaller order quantity is 10000-20000, and the delivery time is 15-20 days after sample confirmation. White and generic models are often in stock.

6. The emulsion bottle is usually cylindrical, 15ml -- 50ml, 100ml each. The overall capacity is small, relying on the principle of atmospheric pressure, can avoid the pollution caused by cosmetics in use. Thermos bottles are made of anodized aluminum, plastic plating, and colored plastic. They are more expensive than other common containers and require less common quantities.

When buying products with 33 teeth emulsion pump, know that during the press process, it needs to be connected to its head, under the action of the compression spring to drive the piston use. In the process of compressing the spring, the outer wall of the emulsion pump piston is often made fully open by the friction of the inner wall, and the liquid appears in the discharge hole of the piston head. As the piston moves down, the internal air will be expelled from the piston head.

We can completely expel the air from the chamber by pressing several times, then pressing the head by hand, and then removing the air from the chamber by the action of the piston rod and the compression spring. At this time, loosen the pressure head of the emulsion pump by hand, and the spring will lose pressure and move down again. At this point, the piston moves down through the friction wall to close the discharge hole.