Common sense of daily chemical products plastic packaging bottle pump head①


Release time :

2023-03-27

Today, I would like to introduce to you some common sense of daily chemical products plastic packaging bottle pump head: ⒈The raw materials of plastic bottles are usually PP, PE, K material, AS, ABS, acrylic, PET, etc. 2. It is usually used for injection molding of cream bottles, bottle caps, corks, gaskets, pump heads, and dust covers with thick walls for cosmetic containers. PET bottle blowing is two-step molding, the tube embryo is injection molding, and the product packaging is bottle blowing. Others such as lotion bottles and scrub bottles with thinner container walls are blown bottles. ⒊PET material is an environmentally friendly material with high insulation, light weight, non-breakable properties, chemical resistance, and strong transparency. It can be made into pearlescent, colored, magnetic white, and transparent. It is widely used in gel water. The bottle mouth is usually the standard 16#, 18#, 22#, 24# caliber, which can be used with a pump head. 4. The raw material of acrylic is injection-molded bottle, which has poor chemical resistance, and usually cannot be directly filled with paste, and needs to be equipped with an inner liner for isolation. The filling is not easy to be too full, so as to prevent the paste from entering between the liner and the acrylic bottle. To avoid cracks, the packaging needs to be high during transportation, because it looks very obvious after being scratched, has high permeability, and feels very thick on the upper wall, but the price is quite expensive. ⒌AS, ABS: AS transparency is better than ABS, and better toughness. ⒍Mould development costs: bottle blowing molds range from 1,500 to 4,000 yuan, and injection molds range from 8,000 to 20,000 yuan. Stainless steel materials for molds are more expensive than alloy materials, but they are durable. How many molds are produced at a time, depending on the output needs, if the output is large, you can choose a mold with four or six molds, and the customer can decide by himself. This is the end of this issue, and the next issue will continue to explain to you the common sense of plastic packaging bottle pump heads for daily chemical products.We welcome more people to pay attention to our company, ZHUHAI BAOLI FOAM SPRAY PUMP CO.,LTD.

Today, I would like to introduce to you some common sense of daily chemical products plastic packaging bottle pump head:

The raw materials of plastic bottles are usually PP, PE, K material, AS, ABS, acrylic, PET, etc.

2. It is usually used for injection molding of cream bottles, bottle caps, corks, gaskets, pump heads, and dust covers with thick walls for cosmetic containers. PET bottle blowing is two-step molding, the tube embryo is injection molding, and the product packaging is bottle blowing. Others such as lotion bottles and scrub bottles with thinner container walls are blown bottles.

PET material is an environmentally friendly material with high insulation, light weight, non-breakable properties, chemical resistance, and strong transparency. It can be made into pearlescent, colored, magnetic white, and transparent. It is widely used in gel water. The bottle mouth is usually the standard 16#, 18#, 22#, 24# caliber, which can be used with a pump head.

4. The raw material of acrylic is injection-molded bottle, which has poor chemical resistance, and usually cannot be directly filled with paste, and needs to be equipped with an inner liner for isolation. The filling is not easy to be too full, so as to prevent the paste from entering between the liner and the acrylic bottle. To avoid cracks, the packaging needs to be high during transportation, because it looks very obvious after being scratched, has high permeability, and feels very thick on the upper wall, but the price is quite expensive.

AS, ABS: AS transparency is better than ABS, and better toughness.

Mould development costs: bottle blowing molds range from 1,500 to 4,000 yuan, and injection molds range from 8,000 to 20,000 yuan. Stainless steel materials for molds are more expensive than alloy materials, but they are durable. How many molds are produced at a time, depending on the output needs, if the output is large, you can choose a mold with four or six molds, and the customer can decide by himself.

This is the end of this issue, and the next issue will continue to explain to you the common sense of plastic packaging bottle pump heads for daily chemical products.We welcome more people to pay attention to our company, ZHUHAI BAOLI FOAM SPRAY PUMP CO.,LTD.