What to do if the lotion is not pumped?


Release time :

2023-02-13

There are two main reasons why the lotion pump cannot pump out liquid. One is that the straw connected to the lotion pump is too short, and the lotion is at the bottom. In this case, you can replace it with a longer straw. Or pour the same cosmetic lotion in a cosmetic lotion bottle. Another situation is that the pressing pump of the cosmetic lotion pump head is broken, and the spring can be reinstalled, of course, it can also be replaced with a brand new lotion pump.

There are two main reasons why the lotion pump cannot pump out liquid. One is that the straw connected to the lotion pump is too short, and the lotion is at the bottom. In this case, you can replace it with a longer straw. Or pour the same cosmetic lotion in a cosmetic lotion bottle. Another situation is that the pressing pump of the cosmetic lotion pump head is broken, and the spring can be reinstalled, of course, it can also be replaced with a brand new lotion pump.

When pressing the newly purchased lotion pump, you need to remove the plastic buckle under the pump head first. The lotion pressing head uses the movement of the piston to remove the internal air, causing a difference in internal and external air pressure to draw the lotion out of the tube. The plastic buckle well controls the squeeze and leakage during transportation, and then hold the product bottle with one hand, and hold the lotion pump head with the other hand to lift it up to make it pop out.

If the pressure is too tight, you can gently press the pressure head down with your hands, and at the same time rotate it slowly counterclockwise until the internal buckle is loose, and the pressure head will pop out with a bang. At this time, press the pump head again to make the lotion flow out, so the problem that the newly bought lotion pump can't come out of the lotion will be solved.

When we usually use the lotion pump, we should be careful not to press hard, and we need to wait for the press to fully rebound before performing the next press. Try to restore the lotion pump to its original state after use, and do not keep it in a pressed state for a long time, which will damage the spring and affect the service life of the lotion pump.

When placing the lotion bottle daily, do not place it obliquely or upside down, as this will affect the life of the spring that presses the bottle. If you need to carry a press bottle for travel, you can put several layers of plastic wrap on the mouth of the press bottle, so that it will not leak even if it is placed flat. The press bottle can hold a lot of things, especially when traveling, it can hold a small amount of toner, lotion, facial cleanser, shampoo, shower gel, etc., which is convenient and practical. For daily use, you can put a small amount of toner in the press bottle, and it can be repaired in a dry environment and after sun exposure. It can be said that the use of the press bottle is very extensive.

Finally, If you have any questions, you can consult us.Welcome more people to pay attention to our company, Zhuhai Baoli Foam Spray Pump Co., Ltd.

Looking forward to cooperating with you.

E-mail: Jacky@zhbaoli.com

P.O.BOX: 519085

Address: No. 196, Nazhou Second Village, Tangjiawan Town, Xiangzhou District,

Zhuhai City, Guangdong Province, China